Tissue Culture Lab
Carnivorous Plants
Laboratory Materials
Erlenmeyer Flask
Glassware
Specifications:
- Pyrex Brand
- Clear ConicalGlass
- 500 ml Capacity
- Borosilicate Glass
- Autoclavable
Top Diameter: 4 cm/ 1.57 inches
Bottom Diameter: 7 cm/ 2.76 inches
Height: 18.5 cm/ 7.28 inches
Uses: For plant tissue culture, microbiological, and any laboratory-related analysis and experimentation.
Graduated Cylinder
Glassware
Specifications:
- Bomex Brand
- Clear Glass
- 100 ml Capacity
- Accurate volume measurement up to +/- 1 cm
- Approximately 25 cm tall and 3 cm diameter
Uses: For measuring the specific volume of liquid chemicals for plant tissue culture and any laboratory-related experiments.
Petri Dish
Glassware
Specifications:
- Unbranded
- Clear Quartz Glass; Thick
- Borosilicate
- Autoclavable
- 90 mm wide
Uses: For inoculation and subculturing of specimen for plant tissue culture. For microbiological analysis of bacterium and fungus as well as for cell culture (plants and animals).
Alcohol Lamp
Glassware
Specifications:
- Unbranded
- High-quality glass lamp with cover.
- 50 ml Capacity
- Minimal Space (for safety purposes).
Uses: For sterilizing/sanitizing plant tissue culture and microbiological apparatus such as forceps, scalpels, wire inoculating loop, etc.
Long Forceps
Tissue Culture Utensils
Specifications:
- Pointed/Elbow Type Forceps
- Stainless Steel
- 28 cm Long
Uses: For plant tissue culture inoculation and subculturing, aquarium landscape and repotting of small plants.
Short Forceps
Tissue Culture Utensils
Specifications
- Angled Clamped Forceps
- Stainless Steel
- 23 cm Long
Uses: A medical/surgical instrument that is also used for plant tissue culture inoculation and subculturing, and repotting of small plants.
Scalpel Holder
Tissue Culture Utensils
Specifications:
- Scalpel Handle No. 4
- Compatibility Blades: #20, #21, #22, #23
- Stainless Steel
Uses: For plant tissue culture inoculation and can also be used for plant and animal dissection.
Scalpel Blade
Tissue Culture Utensils
Specifications:
- Sterile Blade #22
- Compatible Scalpel Holder #4
- 10 pcs per pack
Uses: For plant tissue culture inoculation and can also be used for plant and animal dissection.
Alpha Naphthalene Acetic Acid/ANAA
Plant Growth Regulator/Hormone
Specifications:
- Auxin 98% Purity
- White Fine Powder
- Highly Concentrated Rooting Hormone
- 3 g per pack (equivalent to 3,000 ppm)
- Soluble in ethyl alcohol, potassium hydroxide, and sodium hydroxide 1N (1 Normal).
- For rooting and seed germination in vitro.
- Store in a cool dry place.
- Do not place under direct sunlight.
Indole-3 Butyric Acid/IBA 99%
Plant Growth Regulator/Hormone
Specifications:
- Auxin 99% Purity
- Off-White Fine Powder
- Highly Concentrated Rooting Hormone
- 3 g per pack (equivalent to 3,000 ppm)
- Soluble in ethyl alcohol, potassium hydroxide, and sodium hydroxide 1N (1 Normal)
- For rooting and seed germination in vitro.
- Store in a cool dry place.
- Do not direct from sunlight.
6-Benzylaminopurine/6-BAP
Plant Growth Regulator/Hormone
Specifications:
- Cytokinin 98% Purity
- White Fine Powder
- Highly Concentrated Shooting Hormone
- Soluble in ethyl alcohol, potassium hydroxide, and sodium hydroxide 1N (1 Normal).
- For cloning/multiple plant inducer in vitro.
- Store in a cool dry place.
- Do not place under direct sunlight.
Thidiazuron/TDZ
Plant Growth Regulator/Hormone
Specifications:
- Cytokinin 95%
- Yellow Fine Powder
- Highly Concentrated Shooting Hormone
- Soluble in ethyl alcohol, potassium hydroxide, and sodium hydroxide 1N (1 Normal)
- For cloning, multiple plant inducer, plant cell division in vitro.
- Store in a cool dry place.
- Keep away from direct sunlight.
- Keep away from children.
95% Ethyl Alcohol
Chemicals
Specifications:
- 1 litre
- Transparent Liquid
- Sanitizing Agent
- Solvent for plant growth hormones
- Can also be diluted to make 70% alcohol.
- Used as a flaming substance in tissue culture (blue flame).
- Store in a cool dry place.
- Keep away from direct sunlight.
- Keep away from children.
Potassium Hydroxide/KOH
Chemicals
Specifications:
- Technical Grade
- pH Up Solution
- White or slightly yellow flakes, odorless.
- Available in 120 ml diluted pH adjuster and 60 g flakes good for 1 L (equivalent to 1 Normal solution).
- Corrosive. If your skin comes into contact with KOH, place a few drops of vinegar or citrus fruits (acid-base adjustments). If it comes into contact with your eyes, wash it with running water.
- Store in a cool dry place.
- Keep away from direct sunlight.
- Keep away from children.
Citric Acid/CA
Chemicals
Specifications:
- USP Grade
- pH Down Solution
- Fine white powder, odorless.
- Available in 120 ml diluted pH adjuster and 60 g powder, good for 1 litre.
- Store in a cool dry place.
- Keep away from direct sunlight.
- Keep away from children.
Copper Sulfate
Chemicals
Specifications:
- Technical Grade
- For plant tissue culture use, it acts as a protectant for possible contaminants (e.g. bacteria, fungi, and dust mites) if concentrated.
- Fine blue powder, odorless.
- Available in 120 ml concentrated solution and 250 g powder, good for 1 litre.
- Store in a cool dry place.
- Keep away from direct sunlight.
- Keep away from children.
Modified Knudson C
Chemicals
Specifications:
- Complete fertilizer mix for plant tissue culture.
- Available in 50 g pack, good for 20 litres.
- Instructions attached inside.
- Can also be used as a foliar fertilizer.
Agar Bar
Specifications:
- Pure white agar bar
- Sold per piece (9-10 grams)
- Solidifying agent for plant tissue culture medium.
Autoclavable Glass Bottle
Specifications:
- 8 oz. 220 ml wide-mouth bottle.
Comes with autoclavable plastic cap.
- Sold per box of 24 bottles.
Murashige & Skoog's Medium (MS Medium)
Specifications:
- Origin: China
- Complete nutrient basal medium with vitamins and Myo-Inositol.
- Hassle-free preparation - just add water then autoclave/sterilize
- Fixed pH 5.8
- Fixed sucrose 30g/liter
- Good for 6 liters
pH Paper Strips
Specifications:
- Alkaline-Acid indicator paper
- Long-range pH test (from 0 to 14)
- 100 test strips/set
- Packing size: 88 x 67 x 10mm
- Weight: 45g
Application (Plant Tissue Culture):
Media preparation pH check. Can also be used in water quality, soil, aquarium, urine, saliva, etc.
Weighing Scale
Specifications:
- Capacity: 1 gram – 10,000 grams
- Accurate to 1 gram
- Power Supply: 2 AA batteries included
- Low power consumption
- Auto zero – Auto-off
- Unit display: g/oz
- Auto switch off in 120 seconds without operation
- Size: 237 x 165mm
Aseptic Culture Starter Kit
Includes:
- 100 ml 95% ethyl alcohol
- 120 ml 1N KOH
- 120 ml Citric Acid
- 120 ml Copper Sulfate
- 10 ml 6-BAP
- 10 ml ANAA
- 1 pack Modified Knudson-C (good for 20 litres)
- 1 Petri Dish
- 1 Long Forceps
- 1 Short Forceps
- 1 Scalpel Holder #4
- 5 Scalpel Blades #20/#22
- 1 Alcohol Lamp
- 1 Syringe
- 5 pH Strips with Indicator
- FREE Roots Rooting Powder and USB LED Light
Tissue Culture Laboratory Equipment
Transfer Case
A Formica-coated, wooden cabinet designed for transferring, cultivating, propagating, and/or inoculating any biological specimens - from micro-organisms such as bacteria, fungi (mushrooms) to cells and tissues of animals and plants - to prevent contamination.
The Harbest transfer case has a unique frontal parallel glass facing the worker with a 37" x 6" wide opening. An ideal design for positive airflow that protects the user from the samples and equipment inside.
Our transfer case is cost-efficient and helps with overall lab productivity. Its quality can compare with expensive stainless steel-type laminar flow hoods.
Blower Box
A heavy-duty vertical wooden box that releases positive air pressure out to the transfer cases. The lower part of the box has a protective fiber foam and UV-C Germicidal Lamp to pre-sanitize all possible contaminants (dust, microscopic mites, microbial spores) before it passes through the middle part of the box with H.E.P.A. (High-Efficiency Particulate Adsorption) Filter to absorb 99.97% of the particulates with the filtration efficiency of 0.3 μm which then blows positive airflow through the transfer case using a 2" turbo-type blower.
It is designed to accommodate not only the transfer case but also the whole transfer/inoculating room. A single blower box can connect up to four transfer cases inside your laboratory.